Problems that need our attention when using fan lights

     The living room is a place for guests and parties, and it is also a larger area in the whole house. Therefore, when choosing an invisible fan lamp, the first choice is to have a large number of lamp heads, such as an invisible ceiling fan lamp with five lamp heads, so that the light will be more abundant. If the European-style ceiling fan lamp is required to operate continuously, it should be turned off after 2 to 3 hours of operation to dissipate the heat and then start the machine to prevent the motor from overheating and burning; if any abnormality is found during use, the power will be turned off immediately.

     When starting the electric fan, many people are accustomed to starting from the slow gear first, thinking that this will not only save power, but also protect the parts and prolong the service life. In fact, doing so is counterproductive, and you should start the electric fan with fast gear first. At the same time, it should be noted that frequent starting will also make the motor overheat and shorten the service life.

     In addition, the size of the fan blades of the invisible fan light should also be larger to ensure that the fan area is large enough. In the shape of the invisible fan lamp, you should choose the style that matches the home decoration style. For example, the pastoral or European style decoration and the retro style invisible fan lamp are a perfect match, and the Mediterranean or Chinese style decoration is more suitable for the invisible fan.

     Ceiling fan lamp manufacturers remind us not to choose ceiling-mounted invisible fan lamps in the living room, or invisible fan lamps with the lampshade opening upward, because the former will have weaker wind power and is not suitable for large areas, while the latter will not be suitable for large areas when the fan rotates. The light flickers, and it is easy to feel dizzy. Due to the high frequency of use of invisible fan lights in the living room, it is recommended to install wall control or remote control, which is more convenient to use.

     The European fan lamp has been used for about a year. It is necessary to check whether the parts of the European fan lamp, such as hangers, screws, wiring blocks, blades, etc., are loose or corroded, rusted, cracked, deformed, etc. Whether the hook is firm and the force is good. If there are loose screws, tighten them in time, and replace damaged parts in time. In addition, check the wear degree of screws and pins every 2 to 3 years, and replace them in time if they are found to be seriously worn.