Higher Cost Performance Home Ceiling Fan Installation Guide

Highly Recommend Home Ceiling fan installation height should be appropriate, generally the blade is 2.5~3m from the ground and 400~500mm from the ceiling. Too close to the ground is easy to get injured, and too close to the ceiling will affect the airflow behind the fan blades and reduce the air volume.

The hook should be securely installed. The diameter of the Safe Operation Home Ceiling Fan hook shall not be smaller than the diameter of the ceiling fan suspension pin, and shall not be smaller than 8mm;

It is forbidden to change the angle of the blade; the fixing screws of the blade should have anti-loosening devices; the length of the mesh between the boom and the fan (motor) should not be less than 20mm at each end, and anti-loosening devices should be installed. The wiring is correct, and the fan blade should not vibrate significantly during operation.

Reliable Home Ceiling Fan hooks install on existing concrete structures or on existing concrete structures on beams. Hooks should be installed together with civil works. The hooks buried in this way are very firm. The hooks are pre-buried in the cast-in-place beams or floor slabs, and the hooks are made of steel bars with a diameter of 8-10mm.
When installing the hook on the perforated prefabricated plate, first punch a hole in the prefabricated plate, and the hole needs to be placed at the position where the prefabricated plate has a hole, and then install the hook.