Because the air quality in our country is not very good, there are many dust and particles in the air, if the lamp is left for too long and is not cleaned, the invisible
ceiling fan lamp manufacturer will form a layer of dirt on its surface, which will damage the beauty of the lamp and affect it. The service life of the lamp. So, how should the invisible
Ceiling fan light be maintained? How to clean the dust on the surface of the lamp regularly?
1. Wipe the crystal beads: When wiping the beads, be sure to have a soft cloth dipped in water diluted with detergent, and gently wipe the front and back of the crystal beads at the same time. Be careful not to pinch the beads and pull them down during wiping to avoid tearing. Beads. Wholesale invisible
ceiling fan lights
2. Keep the balance of the lamp body: If you want to remove all the bead strings for cleaning, pay attention to the balance of the lamp body when removing the bead strings. The frame is deformed; it should be disassembled front and rear, left and right.
3. Wipe the bracket accessories: When wiping the bracket and accessories, the soft cloth should not be dampened with water, especially alcohol water, so as not to damage the protective film outside the electroplating layer and affect the gloss effect of the invisible
Ceiling fan lamp on the surface of the lamp stand.
4. Pay attention to safety: when wiping the lamp holder, cut off the power; the bulb should be removed and wiped clean before installing; the bulb should be screwed in moderately, too loose will cause poor contact; too tight may damage the bulb, think crystal The lamp gives full play to its effect, choose ordinary transparent bulbs instead of frosted or colored bulbs.
5. Replace the invisible
Ceiling Fan lamp accessories in time: it is found that the beaded connection buckle is rusty and discolored, one is not beautiful, and the other is easy to be brittle. Replace it by the way; if the bead string is defective, it should be filled in time.
